Error | Error message | Error content | |
code | |||
|
| ||
40 | Lbl duplicate | Labels with identical name found in programme. | |
41 | Lbl undefined | Goto/Gosub encountered with no defined label. | |
42 | Lbl over | More than 50 labels found in programme. | |
43 | Gosub stack | Nesting of more than 10 subroutines found. | |
44 | Line too long | Line contains more than 160 characters. | |
45 | Can’t return | Return used without jumping from subroutine. | |
46 | Storage full | Cannot create more than 99 files. | |
47 | Coord type | Invalid coordinate system for command. | |
48 | Without For | For is missing corresponding to the Next command. | |
49 | Without WEnd | WEnd is missing corresponding to the While command. | |
50 | Without While | While is missing corresponding to the WEnd command. | |
51 | Without Then | Then is missing corresponding to the If command. | |
52 | Without EndIf | EndIf is missing corresponding to the If command. | |
53 | Without If | If is missing corresponding to the EndIf command. | |
70 | I/O device | Communication error found among devices. | |
71 | Wrong Mode | Wrong communication mode set. | |
90 | Memory over | Memory is full; cannot store data as requested. | |
99 | System error | System error found; user memory space is insecure. | |
| Low battery | Operation interrupted due to low battery power. | |
| BREAK!! | Operation break specified. |
*The following operations may cause Editor type error. Correct the Editor type to continue.
•Recall the SOLVER equations (EQTN) or Graph data (G_DATA) stored in a different EDITOR mode than currently in use.
•Receive the Graph equation (Y1 and others) entered in a different EDITOR mode than currently in use.