Installation Manual
Visually check that rear leveling leg is inserted into and fully secured by the
Slide range into cabinet until control panel edge
is flush with the countertop front edge.
Figure 20
care, cleaning and maintenance
Refer to the Operation Manual for cleaning instructions. If removing the range is necessary for cleaning or maintenance, disconnect the electrical power supply. If the electrical supply is inaccessible, lift the unit slightly at the front and pull out away from the wall. Pull only as far as necessary to disconnect the electrical supply. Finish removing the unit for servicing and cleaning. Reinstall in reverse order making sure to level the range and check electrical connections. See pages 2 and 3 for proper anchoring instructions.
before you call for service
Read the BEFORE YOU CALL and operating instruction sections in your Operation Manual. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this range.
Refer to your Operation Manual for our service address. Sharp's
NOTE: Please do not open or close the lower oven door for 30 seconds after plugged in.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey
TINSEB 4 5 5MRR1
Printed in USA