PREPARATION
INSERTING BATTERIES IN THE REMOTE CONTROL
1 | Remove the back cover |
| |
| Press and slide the back cover to re- | ||
| move. |
|
|
2 | Insert batteries | and | as |
| Insert batteries with | ||
| shown below. |
|
|
3 | Close the back cover |
|
|
Battery Information
•The batteries for this remote control are for initial use only . Change the batteries when necessary.
•Incorrect usage of the batteries may cause battery fluid leakage and/or damage.
Take care of the following when handling:
•When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.)
•When not using the unit or remote control for an extended period, re- move the batteries. (This prevents malfunction of the remote control from battery fluid leakage.)
•The batteries of the accessory are for initial use only and may be de- pleted within 1 year.
REMOTE CONTROL USE
• Operate with the remote control facing the main | Receiver |
unit (Receiver). | Transmitter |
• The signal range is about 23 feet (front). |
|
• Make sure there are no objects blocking the path of the signal.
• A beep sound will be heard from the main unit when a signal is received.
NOTE
•Avoid dropping or damaging the remote control. In addition, be sure the remote control avoids moisture or place in direct sunlight or near an electric heater, etc., otherwise a malfunction may occur.
ENGLISH