6 Dry the filter out- doors if possible in a well ventilated area.
CAUTION
•Let the filter dry thoroughly.
If used while the filter is still moist, then the air that is exhausted from the main unit will have an odor. It may take 1 or 2 days to dry.
•Dry the filter outdoors in a well ventilated area. If dried indoors, it may give an odor. In addi- tion, the water dripping off the filter may soil your floor.
•Make sure that the activated carbon has not shifted to one side inside the filter. If it has, dis- tribute it evenly with your fingers.
•Dry the filter as shown in the above illustration. The wet filter is heavy. Fix it securely for drying to make sure it does not fall down.
•The filter takes longer to dry in winter, on rainy days. Wash it on a day when the weather is good and dry it in the sun.
Move it indoors at night to prevent freezing.
7 Reinstalling the Filter and Restart Reinstall the filter as shown on Page
•The filter air may have an odor until the filter is completely dry.
8 Once the Washable Active Carbon Filter has been cleaned, connect the power cord to the outlet and use a pointed instrument to activate the Fil- ter Reset Button on either the Remote Control or the Main Unit.
(Refer to page
FILTER CLEANING
Clean the top surface of the
NOTE
•The True HEPA Filter is damaged eas- ily. Do not bring it into direct contact with the nozzle of a vacuum cleaner or wash it with water. The True HEPA Fil- ter should never be washed or cleaned.
ENGLISH
•Once the Filter Reset Button has been ac- tivated, you will hear a beep sound that means that the unit has been reset.
•The Filter indicator light will then go out automatically.
•If you press the Fil- ter Reset Button on the main unit, re- move the front panel first.
RESET |
FILTER |
ON/OFF |
|
ER |
|
POW | OFFER |
| TIM |
Filter Reset Button
