OPERATION
Main Unit Controls
MAIN UNIT OPERATION
•AUTO
•QUICK CLEAN
•POLLEN
•SILENT
•MEDIUM
•MAX
Plasmacluster | Indicator Light | MODE Selection Button |
| ||
| Power ON/OFF Button |
2 1
1 Power ON/OFF Button
•Used to start operation (short beep) and stop operation (long beep)
•Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
•Unless the power has been interrupted, the operation starts in the previous mode the unit was operated in.
2 | MODE Selection Button |
• The operation mode can be switched. |
AUTO operation
The fan speed is automatically switched (HIGH*, MEDIUM, SILENT) depending on the amount of impurities in the air. The sensor detects the impurities for ef- ficient air purification.
QUICK CLEAN operation
The unit will operate at HIGH* fan speed for 15 minutes, then will operate at Auto operation.
The operation mode is effective when quick removal of impurities in the air is desired.
POLLEN mode operation
The unit will operate at HIGH* fan speed for 10 minutes, then will alternate between MEDIUM and HIGH for 20 minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
MAX operation
The unit will operate at a fan speed of MAX.
MEDIUM operation
The unit will operate at a fan speed of MEDIUM.
SILENT operation
The unit will operate quietly using minimal air intake.
*HIGH fan speed is an interme- diate speed between MEDIUM and MAX.
