DETERMINING THE BASE IMPURITY RATE
For the first 30 seconds after the power plug is inserted into the wall outlet, the unit will check the conditions of the air. If operation is set to ON during this time, the
PLASMACLUSTER INDICATOR LIGHT
Plasmacluster ion operation is selected using the remote control.
Blue light
When the Plasmacluster ion operation is in Clean Mode, or in AUTO Plasmacluster Ion Mode and the air in the room is impure, the light will activate and the unit will operate in Clean Mode.
Green light
When the Plasmacluster ion operation is in the Ion Control Mode, or in AUTO Plasmacluster Ion Mode and the air in the room is clean, this light will activate and the unit will operate in Ion Control Mode.
Light off
There are no Plasmacluster ions being generated.
•The light can be turned off by using the ‘Lights ON/OFF Button’ on the Remote Control. In this case, Plasmacluster ions are generated. (Please turn off the light when not required.) (See Page
CLEAN-SIGN LIGHT
The color changes according to the air condition.
Clean (Green) | Slightly Impure (Orange) | Very Impure (Red) | ||
|
|
|
|
|
ABOUT THE CLEAN-SIGN
•The condition of the
•It is possible to have a green
•Use the Lights ON/OFF Button on the remote control to turn off the Indicator light.
ENGLISH FRANÇAIS