OPERATION
Operations available with the Remote Control
• AUTO
• MANUAL
REMOTE CONTROL OPERATION • POLLEN
• OFF TIMER
• QUICK CLEAN
• LIGHTS ON/OFF
| Plasmacluster Ion mode | |
| POWER ON/OFF Button | selections | |
• AUTO | ||
• When you press the | • CLEAN | |
• ION CONTROL | ||
POWER ON/OFF Button, | • OFF | |
a short beep will sound | ||
| ||
and operation will start in |
| |
AUTO Mode. | Transmitter | |
• Unless the power has been | ||
| ||
interrupted, the operation |
| |
starts in the previous mode |
| |
the unit was operated in. | Pollen Mode Operation | |
| ||
• To stop, press the POWER | Button | |
ON/OFF Button again. | See Page | |
A long beep will sound and |
| |
operation will stop. |
|
Auto (Fan Speed) Button
The fan speed switches au- tomatically depending on the amount of impurities in the air.
Manual (Fan Speed) Button
The fan speed can be switched among Silent, Medium and MAX settings.
QUICK CLEAN Button
See page
LIGHTS ON/OFF Button
Switches the Plasmacluster Indicator Light and CLEAN- SIGN Light either ON or OFF.
Off Timer Button
The set time switches every time the button is pressed as shown below.
1 hour |
| 4 hours |
|
|
|
Cancel |
| 8 hours |
•The indicator light shows the remaining time.
•The unit will stop operation when the timer is up.
Plasmacluster Ion Mode Selections
AUTO
When pressed, the unit will switch between Clean Mode and the Ion Control Mode automatically depending on the amount of impurities in the air as detected by the odor sensor. Clean Mode will operate for 1 minute when the Auto function is selected.
ION CONTROL
When pressed, the unit will constantly operate in Ion Control Mode.
The Plasmacluster Ion Indicator Light is green.
CLEAN
When pressed, the unit will constantly operate in the Clean Mode, in which the same numbers of positive and negative ions are discharged. The Plasmacluster Indicator Light is blue.
OFF
The generation of ions will cease and the Plasmacluster Indicator Light will go out.
