PREPARATION
INSERTING BATTERIES IN THE REMOTE CONTROL
1 | Remove the back cover | |||
Press and slide the back cover to | ||||
| remove. |
|
|
|
2 | Insert batteries |
|
|
|
Insert batteries with | and |
| as | |
| ||||
shown below.
3 Close the back cover
Battery Information
•The battery life is about 1 year.
•The batteries for this remote control are for initial use only . Change the batteries when necessary.
•Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling:
•When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.)
•When not using the unit or remote control for an extended period, remove the batteries.
•The batteries are for initial use only and may be depleted within 1 year.
REMOTE CONTROL USE
•Operate with the remote control facing the main unit receiver.
•The signal range is about 23 feet (7m).
• Make sure there are no objects blocking | Receiver |
the path of the signal. |
|
• A beep sound will be heard from the main |
|
unit when a signal is received. | Transmitter |
NOTE
•Avoid dropping or damaging the remote control, using in a high humidity condition, in direct sunlight or near a heat source.
ENGLISH FRANÇAIS
