Sharp GS-XP24FR, GS-XP07FR Contents, Important Safety Instructions, Warnings For Use, English

ENGLISH

Thank you for purchasing a SHARP air conditioner. Please read this manual carefully before operating the product.

CONTENTS

• IMPORTANT SAFETY INSTRUCTIONS	E-1
• ADDITIONAL NOTES ON OPERATION	E-3
• TIPS ON SAVING ENERGY	E-3
• PART NAMES	E-4
• USING THE REMOTE CONTROL	E-6
• BASIC OPERATION	E-8
• ADJUSTING THE AIR FLOW DIRECTION	E-10
• FULL POWER OPERATION	E-11

• ONE-HOUR OFF TIMER	E-11
• TIMER OPERATION	E-12
• TIPS ABOUT PLASMACLUSTER
OPERATION	E-14
• PLASMACLUSTER OPERATION	E-14
• AUXILIARY MODE	E-15
• MAINTENANCE	E-15
• BEFORE CALLING FOR SERVICE ....	E-17

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS FOR USE

1	Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
	can result in damage to the unit and cause electrical shock.
2	Be careful not to expose your body directly to the outlet air for a long time. It may affect
	your physical conditions.
3	When using the air conditioner for infants, children, elderly, bedridden, or disabled people
	make sure the room temperature is suitable for those in the room.
4	Never insert objects into the unit. Inserting objects can result in injury due to the high
	speed rotation of internal fans.
5	Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
	water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
	electric shock.
6	If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
	immediately and turn the circuit breaker OFF.
7	The appliance shall be installed in accordance with national wiring regulations. Improper
	cable connection can cause the power supply cord, plug and the electrical outlet to
	overheat and cause fire.
8	If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
	or a similarly qualified person in order to avoid a hazard. Use only the manufacture-

specified power cord for replacement.

WARNINGS FOR INSTALLATION / REMOVAL / REPAIR

•Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the installation/removal/repair of the unit.

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/ EEC as amended by 93/68/EEC.

ENGLISH

E-1