USING THE REMOTE CONTROL
LOADING BATTERIES Use two
1 Removecover. the remote control
2 Insert batteries in the compart- ment, making sure the ± and
—polarities are correctly aligned.
•The display indicates "AM 6:00" when batteries are prop- erly installed.
3 Reinstall the cover.
Remote control cover
-
+ 
+
-
NOTES:
•The battery life is approximately one year in normal use.
•When you replace the batteries, always change both batteries, and make sure they are the same type.
•If the remote control does not operate properly after replacing the batteries, take out the batteries and reinstall them again after 30 seconds.
•If you will not be using the unit for a long time, remove the batteries from the remote control.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit’s signal receiver window and press the desired button. The unit generates a beep when it receives the signal.
• Make sure | there | is no | Ceiling suspended | |
curtain or | other | object | Floor standing | |
between the remote control | ||||
| ||||
and the unit.
• The remote control can send signals from up to 7 metres away.
