ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW DIRECTION
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button on the remote control once.
• The vertical adjustment louvre will change its angle continuously.
Press the SWING button again when the vertical adjustment louvre is at the desired position.
•The louvre will stop moving within the range shown in the diagram.
•The adjusted position will be memorized and will be automatically set to the same position when operated the next time.
Adjustment range
COOL and DRY modes | HEAT mode |
| |
Floor standing | Ceiling suspended | Floor standing | Ceiling suspended |
The adjustment range is narrower the SWING range in order to prevent con- densation from dripping.
The range is wide so the air flow can be directed toward the floor.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment | Floor standing | Ceiling suspended |
|
| |
louvre as shown in the diagram |
|
|
and adjust the air flow direction. |
|
|
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
•Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the remote control is used for adjustment.
•When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode with the fan speed set to "SOFT( 
)" for an extended period of time.
Condensation may form on the louvres.
