AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Press the AUX. button using a thin stick on the indicator panel.
• The red OPERATION lamp ( 
) on the unit will light and the unit will start operating in the AUTO mode.
• The fan speed and temperature setting are set to AUTO.
AUX.
TO TURN OFF
Press the AUX. button again.
•The red OPERATION lamp ( 
) on the unit will turn off.
NOTE:
If the AUX. button is pressed during normal operation, the unit will turn off.
ENGLISH
MAINTENANCE
Be sure to disconnect the power cord from the wall outlet or turn off the circuit breaker before performing any maintenance.
CLEANING THE UNIT AND THE REMOTE CONTROL
•Wipe them with a soft cloth.
•Do not directly splash or pour water on them. We can cause electrical shock or equipment damage.
•Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE AFTER AIR CONDITIONER SEASON
1 Operate the unit in the COOL mode, temperature setting 32°C, for about half a day to allow the mechanism to thoroughly dry.
2 Stop the operation and unplug the unit. Turn off the circuit breaker, if you have one exclu- sively for the air conditioner.
3 Cleanthem. the filters, then reinstall
MAINTENANCE BEFORE AIR CONDITIONER SEASON
1 Make sure that the air filters are not dirty.
2 Make sure that nothing obstructs the air inlet or outlet.
3 Check the outdoor mounting rack periodically for wear and to make sure it is firmly in place.
