Sharp GS-XP24FR, GS-XP07FR, GS-XP09FR, GS-XP27FR, GS-XP18FR, GS-XP12FR Set Current Clock Time

CAUTION

•Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light.

•Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal.

•The unit can be affected by signals transmitted from the remote control of a television, VCR or other equipment used in the same room.

•Do not leave the remote control in direct sunlight or near a heater. Also, protect the unit and remote control from moisture and shock which can discolour or damage them.

ENGLISH

SET CURRENT CLOCK TIME

There are two clock modes: 12-hour mode and 24-hour mode.

Example: 5 o'clock in the afternoon

Clock	Display
12-hour mode	PM 5:00
24-hour mode	17:00

MODE	1h			1	To set to the 12-hour mode, press the
					CLOCK button once in the first step.
					To set to the 24-hour mode, press the
FAN			2		CLOCK button twice in the first step.
SWING					Press the TIME ADVANCE or REVERSE
			3	2 button to set the current time.
		SET/C			• Keep the button pressed to advance
					or reverse the time display quickly.

13 Press the SET/C button.

•The colon (:) blinks to indicate that the clock is functioning.

NOTE:

•The current time cannot be set when the timer is operating.

E-7