ENGLISH
Connection to an external control device
q w e r
qFlasher input connector (FLASHER IN)
Used when connecting a control box or other control device to this unit, and using such a device to control this unit.
wDC control output connector
(DC CONTROL OUT)
Used when connecting a device that has a DC control input terminal to this unit, and linking the power ON/STANDBY function of this device with the power ON/STANDBY of the connected device.
An electrical signal of max 12 V/44 mA is output from the DC control output terminal.
For details, see the instruction manual of the connected device.
NOTE
•Do not use the DC control output terminal as the power supply for an external device.
•When using this unit with a device connected to the DC control connector, set the auto standby function to “Off” (vpage 9 “Setting the power to standby automatically (Auto standby function)”).
eDC control input connector
(DC CONTROL IN)
Used when connecting a unit that has a DC control input terminal to this device, and linking the power ON/STANDBY of the connected device with the power ON/STANDBY of this unit.
For details, see the instruction manual of the connected device.
NOTE
•When a 5 V – 15 V voltage is input to the DC control input terminal, the power of this unit switches ON.
However, inputting voltage outside of this range will cause damage to this unit.
•When using this unit with a device connected to the DC control connector, set the auto standby function to “Off” (vpage 9 “Setting the power to standby automatically (Auto standby function)”).
rRemote control connector
Used when connecting an external control device to this unit, and using the device to control this unit.
NOTE
When connecting a marantz AV8801 or AV7701 AV
For details, see the AV8801 or AV7701 owner’s manual.
8
