Sharp GX-BT3 specifications English

ENGLISH

Introduction

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.

Accessories

The following accessories are included.

Remote control x 1 (RRMCGA343AW01)

GX-BT3

NFC tag x 2

Velcro tape

(hook type) x 2

Velcro tape

(loop type) x 3

CONTENTS

	Page		Page
General Information		Advanced Features
Precautions	1 - 2	Connecting other equipment .	......................................... 9
Controls and indicators	2 - 3	References
Preparation for Use		Troubleshooting chart	9-10
Power Source	4	Maintenance	10
Remote control	4	Specifications	10
Basic Operation
General control	5
Bluetooth
Bluetooth one touch connection via NFC	6
Listening to Bluetooth enabled devices	7 - 8

Precautions

General

Please ensure that the equipment is positioned in a well ventilated area and ensure that there is a free space along the sides, top and back of the equipment as be- low.

	Gap	10 cm (4”)
30 cm (12”)	30 cm (12”)		10 cm (4”)

Do not obstruct the gap when turning off the unit.

Use the unit on a firm, level surface free from vibration.

Place the unit at least 30 cm (12”) away from any CRT TV to avoid colour variations across the TV screen. If the variations persist, move the unit further away from the TV. LED, plasma and LCD TV are not prone to such variation.

Keep the unit away from direct sunlight, strong mag- netic fields, excessive dust, humidity and electronic/ electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.

Do not place anything on top of the unit.

Do not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to extremely low tempera- tures.

If your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system.

In case of an electrical storm, unplug the unit for safety.

Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.

The AC power plug is used as a disconnect device and shall always remain readily operable.

Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Attention should be drawn to the environmental aspects of battery disposal.

This unit should only be used within the range of 5°C - 35°C (41°F - 95°F).

The apparatus is designed for use in moderate climates.

E-