Listening to Bluetooth enabled devices
■Bluetooth
Bluetooth wireless technology is a
This unit supports the following:
Communication System: Bluetooth Specification version 2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
●This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone.
●Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile phone whilst transmitting the sound using a Bluetooth connection.
PAIRING
| MUTE |
| ON/ |
| ECO MODE | ||
| BASS | TREBLE | VOL |
BLUETOOTH | PAIRING |
| |
BLUETOOTH AUDIO IN |
| ||
DIMMER
RRMCGA343AWSA
■Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they can exchange data. Once paired, it is not necessary to pair them again unless:
●pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This unit can be paired to a maximum of 8 devices. If sub- sequent device is paired, the oldest device paired, will be deleted and replaced with the new one.
●this unit is reset. All pairing information is deleted when unit is reset.
●pairing information is deleted whilst
Indicators:
Status | PAIRING indicator (blue) |
Unconnected | Blinks |
Pairing mode | Blinks quickly |
Connected | Lights up |
However, the indicator status is not displayed during Bluetooth
■Pairing with other Bluetooth source devices
Press the
2Press the BLUETOOTH button on the remote control or FUNCTION button repeatedly on the main unit to select Bluetooth function. (Pairing indicator blinks.)
3Press and hold the PAIRING button for 3 seconds or more.
PAIRING indicator blinks quickly. The unit is now in pairing mode and is ready to be paired with other Bluetooth source device.
4Perform pairing procedure on the source device to detect this unit. “SHARP
Notes:
●Place the devices to be paired within 1 metre (3 feet) of each other when pairing.
●Some source devices are unable to display lists of detected devices. To pair this unit with the source device, refer to the source device operating manual for details.
5Select “SHARP
* Passcode may be called PIN Code, Passkey, PIN number or Password.
6Pairing indicator (blue) will stop blinking once the unit is successfully paired with the source device. (Pairing information is now memorised in the unit.)
Some audio source devices may connect with the unit automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection.
7Press the play button on remote control or source de- vice to start Bluetooth streaming playback.
Notes:
●If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency near the system some sound interrup- tion may be heard.
●The transmission distance of the wireless signal between the device and the main unit is about 10 m (30 feet), but may vary depending on your operating environment. If a steel concrete or metallic wall is between the device and the main unit, the system may not operate at all, because the wireless signal cannot penetrate metal.
●If this unit or the source device is turned off before Blue- tooth connection is completed, pairing will not be com- pleted and the pairing information will not be memorised. Repeat step 1 onwards to start pairing again.
●To pair with other devices, repeat steps 1 - 5 for each de- vice. This unit can be paired to a maximum of 8 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one.
●Once a device is ousted or deleted from the pairing list, the pairing information for the device is also deleted. To listen to the sound from the device again, it needs to be
E-
