Sharp GX-BT3 Listening to Bluetooth enabled devices continued, Listening to the sound

Listening to Bluetooth enabled devices (continued)

■Listening to the sound

Check that:

●The source device Bluetooth functionality is ON.

●Pairing of this unit and the source device is completed.

●Unit is in connected mode (pairing indicator (BLUE) lights up.)

Press the ON/STAND-BY button to turn the power on.

2 Press the BLUETOOTH button on the remote control or FUNCTION button repeatedly on the main unit to select Bluetooth function.

3 Start the Bluetooth connection from the Bluetooth stereo audio source device.

4 Playback will start automatically, otherwise press play (on remote control or source device).

Notes:

●For various Bluetooth operations, refer “NFC con- nection for audio playback” on page 6.

●If the source device has an extra bass function or equalizer function, set them to off. If these functions are on, sound may be distorted.

Notes:

●Make the Bluetooth connection again if the source device is not turned on, or its Bluetooth functionality is off or is in sleep mode.

■To disconnect the Bluetooth device

Perform any of the followings.

-Disconnect the Bluetooth connection on the audio source device.

Refer the operating manual supplied with the device.

-Turn off the Bluetooth stereo audio source device.

-Turn off this unit.

Note:

The volume of this unit may not be controlled as intended depending on the device.

■Auto power on

During Bluetooth stand-by mode, the unit will automatically power on when the Bluetooth connection has been set up between the main unit and your device.

Note:

This function is not applicable during Eco mode.

E-