Sharp GX-BT3 General control,  Auto power off function,  X-Bass control,  To turn the power on

(LED light dim)

(LED light gets dimmer.) (LED light bright)

General control

ON/

STAND-BY

ON/

MUTE ECO MODE STAND-BY

BASS TREBLE	VOL
PAIRING	X-BASS	VOL
BLUETOOTH AUDIO IN
		X-BASS
DIMMER
RRMCGA343AWSA

GX-BT3

Auto power off function

The unit will enter the stand-by mode if:

Bluetooth: No connection for 60 seconds.

Audio In: No detection of input signal after 20 minutes

X-Bass control

To turn on/off the X-Bass, press the X-BASS button repeatedly until the desired X-Bass mode appears.

LED will light up according to the desired X-Bass mode.

To turn the power on

Press the ON/STAND-BY button to turn the power on.

When the power is first turned on, the speaker frames move outwards and pneumatic sound will be heard (default setting).

To turn off the pneumatic sound, press and hold the X-BASS button. The LED lights up and then fades out.

To return to the default setting, press and hold the X-BASS button again. The LED light will slowly fade in.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

LED light brightness control

To dim the LED light brightness.

Press DIMMER button on the remote control to change

the mode. Dimmer 1

Dimmer 2

Dimmer Off

Volume auto fade-in

If you turn off and on the main unit with the volume set to almost maximum, the main unit starts with moderate volume and fades in to the last set level.

Volume control

Press VOLUME +/– buttons (on main unit) or VOL +/– (on remote control) to increase or decrease the volume.

The LED light will blink when the volume reaches maximum or minimum level.

Function

When the FUNCTION button on the main unit is pressed, the current function will change. Press the FUNCTION button repeatedly to select the desired function.

Bluetooth : Pairing indicator lights up.

AUDIO IN : LED lights up at the minimum level.

Direct key power on function

When you press any of the following buttons, the unit turns on.

/ on the remote control: last selected function activated.

AUDIO IN on the remote control: audio function activated.

BLUETOOTH on the remote control: Bluetooth function activated

-		-	ON
X-BASSON		X-BASS ON
X-XBASS-	OFF	X--BASSOFOFF

Note

The X-Bass mode will be set to off when BASS/TREBLE control is adjusted.

Bass and treble control

Press BASS or TREBLE +/- button on the remote control to increase or decrease the bass or treble level respectively.

LED will light up according to the desired Bass or Treble level.

+ 4			+ 4
+ 3	+ 3
+ 2	+ 2
+ 1	+ 1
0	0
- 1	- 1
- 2	- 2
- 3	- 3
- 4		- 4

Muting

The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume.

E-