Sharp HTSB250 Error indicators and warnings, Specifications, E-15, Display, Meaning, Power, power

Error indicators and warnings

When you fail to perform operations properly, the following messages are displayed on the unit.

	Display	Meaning
		● Malfunction of the surround circuit. Place the unit
or	or	away from noise source and plug the AC power
		cord into another AC outlet. (*)
		● When the protection circuit of the amplifier is
Power indicator (blinks red)		activated.

(*): Should the same message appear even if the unit is unplugged and plugged in or is set to the stand-by mode and on again, contact your local dealer where you purchased the unit.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specifica- tion figures indicated are nominal values of production unit. There may be some deviations from these values in individual unit.

■General

Power	DC IN 12V 4A: AC/DC
source	adaptor
	(AC 100 - 240 V ~ 50/60
	Hz)
Power	10 W
consumption
Maximum	32 W
output
power
Speaker	2.1-way Speaker System
	Front Speakers: 1-1/2”
	(40 mm) Full Range
	Impedance: 12 ohms /
	Channel
	Subwoofer: 2-1/4” (57 mm)
	Woofer (x4)
	Impedance: 3 ohms

Input	Analog input (LINE 1):
terminals	RCA type x 1pair (L/R)
	500 mV / 47 kohms
	Analog input (LINE 2):
	Stereo mini jack Ø 3.5 mm
	100 mV / 47 kohms
Dimensions	Width: 33-1/2” (851 mm)
	Height: 3-3/4” (96 mm)
	Depth: 2-3/4” (70 mm)
Weight	4.19 lbs. (1.90 kg)

E-15