AC power connection
After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet.
■Using with the AC/DC adaptor
1Plug the AC power cord into the AC/DC adaptor.
2Plug the AC/DC adaptor cable into the DC INPUT jack on the unit.
3Plug the AC power cord into an AC outlet.
AC/DC Adaptor | 2 | |
Cable | ||
|
Remote control
■Battery installation
This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may apply, California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/
Insert pin into the hole as shown and pull to open the battery holder.
Pin
Back of
remote control
DC INPUT jack (DC 12V)
AC power cord
| LINE IN 2 | RIGHT | LEFT |
| LINE IN 1 | ||
|
|
|
|
1 
2Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control.
Battery holder 
Battery type
AC/DC Adaptor (AC 100 - 240 V
Polarity (+) symbol
Locking tab
AC outlet
~ 50/60 Hz)
Positive (+) side up
Caution:
If this product is to be used in other than 120 V region, please change the AC power cord to suit the region.
The AC power cord part codes for 220 - 240 V region are as follow :
1) QACCEA002AW00 (For Europe and Latin America region)
2) QACCBA005AW00 (For United Kingdom region)
3) QACCLA002AW00 (For Australia region)
Notes:
●There will be no indication during power
●Unplug the AC/DC adaptor from the AC outlet if the unit will not be used for a prolonged period of time.
●Use only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an electric shock or fire.
Precautions for battery use:
Remove the battery if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
Caution:
●Do not use rechargeable battery (nickel- cadmium battery, etc.).
●Danger of explosion if battery is incorrectly replaced.
●Replace only with the same or equivalent type.
●Batteries (battery pack or batteries installed)
