REFILLING THE WATER TANK
The unit can be used in the Clean Air Mode without putting water in the Water Tank. When using in the Hu- midify Mode, the Water Tank should be filled with water.
1 Remove the Water Tank by unlatching the top.
ENGLISH
2 Remove the Tank Cap and carefully fill the Water Tank with tap water.
Change the water in the Water Tank every day with fresh tap water.
Tank Cap
3 After filling, securely tighten the Tank Cap.
• Check to see that there is no water leaking.
• Be sure to wipe off any excess water on the outside of the Water Tank.
• When carrying the Water Tank, hold it with both hands so that the Water Tank opening is facing up.
4 Replace the Water Tank in the unit.
The top latch will “click” in place when the Water Tank is properly installed.
CAUTION
•Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.
•Do not use hot water 104 ºF (40 ºC), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur.
•Use only fresh tap water. Use of other water sources may promote the growth of mold, fun- gus and/or bacteria.
