OPERATION
MAIN UNIT OPERATION
Fan Speed Button
Plasmacluster Ion
ON/OFF Button
Fan Speed Indicator Lights | POWER ON/OFF |
Plasmacluster Ion Indicator Light | Button |
To select Clean Air mode, be sure the water tank and humidifying tray are empty. To select Clean Air plus Humidify mode, fill the water tank and install on the unit.
Power ON/OFF Button
•Press to start operation (short beep) and stop operation (long beep)
•Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
•Unless the power cord has been unplugged, the opera- tions starts in the previous mode it was operated in.
Fan Speed Button
• Press the Fan Speed Button to select the desired fan speed. Indicator Lights will show the fan speed cur- rently selected.
• The operation mode can be switched as below.
The fan speed is automatically switched (between HIGH and LOW) depending on the amount of impurities in the air. The sensor detects impurities for efficient air purfication.
The unit will operate at a fan speed of MAX.
The unit will operate quietly using minimal air intake.
The unit will operate at a fan speed of MEDIUM.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn Plasmacluster Ion Mode ON and OFF.
When Plasmacluster Ion is ON, the Plasmacluster Ion Indicator Light will turn on.(blue)
