Insert the tab of the float into the hole.

HUMIDIFYING TRAY

 

 

Frequency of maintenance cycle will depend on the hardness

Care Cycle

1 month
of the water. Avoid spilling water when removing or cleaning

 

 

the tray.
Remove the Water Tank and Humidifying Tray.
1 Unlatch the Wa-

 

ter Tank first, then

Tank Handle

remove the tray.

 

Use both hands

 

when pulling out the

Water Tank

Humidifying Tray to
avoid spilling water.

 

2Remove the Water Tank and Humidifying Filter from the Humidifying Tray. Drain ac- cumulated water by tilting the Humidify- ing Tray slowly.

D o n o t h o l d this part.

Humidifying Filter

Humidifying

Tray

3 Rinse the inside of the Humidifying Tray with lukewarm water to remove impurities.

• Do not remove the

Float

Styrofoam float .

 

• Clean difficult-to-

 

reach parts with a

 

cotton-tipped swab

 

or tooth brush.

 

4 Replace the Humidifying Filter and replace the Humidifying Tray in the unit.
The Humidifying Filter will not

Color:Gray

fit if placed in backwards. Be

 

sure there is no gap between

 

the Humidifying tray and the

 

unit when the Humidifying Tray

 

is replaced in the unit. The unit

 

may not operate properly if the

 

Humidifying Tray is not properly

 

replaced in the unit.

 

If the Styrofoam float comes off,

 

replace by inserting the tabs of

 

the Float into the holes in the

 

Humidifying Tray as shown in the

 

diagram.

 

When Water Deposits are Difficult to Remove

1 Fill Humidifying Tray halfway with lukewarm water, add a small amount of mild kitchen detergent, and leave to soak for about 30 min- utes.

Dilute detergent according to instructions on the container. Clean difficult-to-reach parts with a cotton swab or tooth brush.

2Rinse the Humidifying Tray with lukewarm water.•Rinse until all detergent residue is removed.•Inadequate rinsing may cause the detergent odor or changesin the shape/ color of the main unit.

CAUTION

•Use only mild kitchen detergents to clean the Humidifying Tray. Use of non-designated chemicals or deter- gents can cause deformation, tarnish- ing, cracking (water leakage).

Insert the float below this tab.

Insert the tab on the other side of the float into the hole.

ENGLISH

E-17