Sharp LB-1085 operation manual Specifications

Appendix

Specifications

Model			LB-1085
LCD panel			108˝ screen size class Advanced Super View & BLACK TFT LCD
			(Diagonal Measurement: 2,732.7 mm)
Resolution			2,073,600 pixels (1,920 x 1,080)
Audio out			15W x 2 (4 Ω)
		INPUT 1	COMPONENT in, Audio in
		INPUT 2	AV in, S-VIDEO in
		INPUT 4	HDMI in with HDCP
		INPUT 5	HDMI in with HDCP
	Rear	INPUT 6	Audio in, HDMI in with HDCP
Terminals		INPUT 7	DVI-I in with HDCP, Audio in (Ø 3.5 mm jack)
		DIGITAL AUDIO OUTPUT	Optical Digital audio output x 1 (PCM)
		OUTPUT	Audio out
		RS-232C	9-pin D-sub male connector
		SPEAKER	Speaker Terminal
	Side	INPUT 3	AV in, COMPONENT in
OSD language			English/German/French/Spanish
Power Requirement			AC 200-240 V, (Single-phase, 3-wire type) 50/60 Hz
Power Consumption			1,130 W (0.8 W Standby with AC 200 V)
Weight		LCD Monitor + stand*1	250.0 kg
		LCD Monitor only	195.0 kg
Dimension*2		LCD Monitor + stand*1	2572 x 1815 x 600 mm
(W x H x D)		LCD Monitor only	2572 x 1591 x 204 mm
Operating temperature			0°C to +40°C

*1 With factory-shipped stand.

*2 The dimensional drawings are shown on the inside back cover.

The heights include the protruding part of the eye bolt. The depth excludes protrusions.

•• As part of policy of continuous improvement, SHARP reserves the right to make design and specifcation changes for product improvement without prior notice. The performance specifcation fgures indicated are nominal values of production units. There may be some deviations from these values in individual units.

•• The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness.

Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor.

30