18
Direct Button Operation
Changing Volume
You can change the volume by pressing VOL /
on the LCD Monitor or on the remote control unit.
To increase the volume, press • VOL .
To decrease the volume, press • VOL .
20
Audio status
Output device Output Select
Fixed Variable
Speaker Variable sound Mute
When “Output Select” is set to “Variable”, the indicator •
on the screen changes as shown below.
60
See page 27 for details on the Output Select function.•
MUTE
Mutes the current sound output.
Press MUTE.
“• ” will be displayed on the screen for 30 minutes,
and the sound is silenced.
Within 30 minutes of pressing • MUTE, mute can be
canceled by using one of the methods below.
- Mute will be canceled if you press VOL / or
MUTE.
Mute will be canceled after 30 minutes have •
passed. However, the LCD Monitor will not suddenly
output a loud sound as the volume level is set to 0
automatically.
Sleep Timer
Allows you to set a time when the LCD Monitor
automatically switches to standby.
Press SLEEP.
The remaining time displays when the sleep timer has •
been set.
Each time you press • SLEEP, the remaining time
switches as shown below.
Off 30 60 90 120
When set, the time automatically starts counting down.•
If you want to adjust the sleep timer, you can press •
SLEEP twice then change the time setting.
Five minutes before the time expires, the remaining •
time displays every minute.
Select “Off” by pressing • SLEEP to cancel the sleep
timer.
The LCD Monitor will enter standby when the •
remaining time reaches zero.
When the sleep timer is set, its indicator on the LCD •
Monitor lights red.