PREPARATION

Preparing and Using the Remote Control

Use the remote control by pointing it towards the remote sensor window. Objects between the remote control and sensor window may prevent proper operation.

Cautions regarding use of remote control

Do not expose the remote control to shock.

In addition, do not expose the remote control to liquids, and do not place in an area with high humidity.

Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.

The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window.

POWER SLEEP

SLEEP indicator Power/Standby indicator Remote sensor window

Batteries for Remote Control

Before using the LCD TV set for the first time, install two (“AAA” size, UM/SUM-4) batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new (“AAA” size, UM/SUM-4) batteries.

1 Open the battery

2 Insert two (“AAA” size,

3 Close the battery

cover.

UM/SUM-4) batteries.

cover.

Slide the cover while pressing the ([) part.

Position the positive and negative ends of the batteries as indicated in the compartment.

Engage the claw on the cover into the battery housing and slide shut.

Caution!

Cautions regarding batteries

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

Place batteries with their terminals corresponding to the (+) and (–) indications.

Different types of batteries have different characteristics. Do not mix batteries of different types.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals.

Remove batteries as soon as they are non-operable.

Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

If the remote control is not used for an extended period of time, remove batteries from the remote control.

5

Page 6
Image 6
Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M Preparation, Preparing and Using the Remote Control