Checking Signal information (Continued)
H Checking Signal information
Press a/b to select “Signal information”.
Auto search
Manual search
Manual adjust
Channel number 68
Signal information | Signal strength |
Antenna power
Current 100 Maximum 100 Signal quality
Current 98 Maximum 98
4Position and align the antenna so that the maximum possible values for “Signal strength” and “Signal quality” are obtained.
NOTE
•The values of “Signal strength” and “Signal quality” indicate when to check the appropriate alignment of the antenna.
Auto installation
You can run auto installation again, even after setting up the preset channels.
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
3Press a/b to select “Auto installation”, and then press ENTER.
4If you have already set the password, enter it here.
• See page 12 for setting a password.
5Press c/d to select “Yes”, and then press
ENTER.
6Press a/b/c/d to select “DTV”, “ATV” or “ATV + DTV”, and then press ENTER. Press a/b to select the desired sound system, and then press ENTER.
•Sound system is selectable when the signal search is set to “ATV” or “ATV + DTV” mode only.
You do not need to do anything during the auto search. Press MENU to exit.
Programme setup
Digital settings
You can reconfi gure DTV services settings automatically or manually.
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
3Press a/b to select “Digital Programme Setup”, and then press ENTER. If you have already set the password, enter it here.
• See page 12 for setting a password.
4Press a/b to select the desired menu item, and then press ENTER.
5Press c/d to select “Yes”, and then press
ENTER.
H Auto search (Digital)
Use this menu to add new services automatically after auto installation has been completed.
H Manual search (Digital)
Add new services within a specifi ed frequency band.
•Press c/d to select the frequency and then press
ENTER.
H Manual adjust (Digital)
Confi gure various settings for each service using the Colour (R, G, B) buttons.
Digital Programme Setup]
1Press a/b to select desired service.
2Press the Colour button on the remote control corresponding with the item you want to reconfi gure.
•Each time the Colour button is pressed, you can switch the corresponding operation on/off.
Buttons for Manual adjust operation
Menu | Remote | Description | |
control | |||
items | |||
buttons |
| ||
|
| ||
Lock | R | When the service is locked, | |
|
| you must enter your password | |
|
| whenever you tune to the service. | |
|
|
| |
CH | G | Services with “Skip” are passed | |
Skip |
| over when pressing r/s in the | |
|
| TV/remote control unit. | |
|
|
| |
Sort | B | The item position of services can be | |
|
| sorted. | |
|
|
|
8
