H 4:3 mode
The WSS signal has 4:3
Selected item |
| Description |
|
| |
Panorama | Wide image without side bars | |
|
| |
Normal | Normal range keeping 4:3 or 16:9 aspect | |
| ratio |
|
|
| |
| WSS signal 4:3 screen | |
4:3 mode “Panorama” | 4:3 mode “Normal” | |
H Quick start
You can reduce the TV’s
Selected item | Description |
|
|
On | The TV quickly starts up from standby, |
| 8.5W or more of power consumption is |
| required during standby. |
Off | Power consumption is less than 1W. |
|
|
H Text language
Select from among 3 kinds of language: West Europe, Arabic, Farsi.
NOTE
•Teletext can display only when it is sent by a network. Not used to convert between languages.
HIdentification
You can check the current version of the software on the screen.
HReset
If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.
NOTE
•If you execute “Reset”, all the settings such as Picture, Audio and Programme will be reset to the factory preset values.
Option menu
Option | Digital setup |
|
|
|
|
Input select |
|
PC audio select | [HDMI1] |
Auto volume | [On] |
Digital audio output | [PCM] |
Audio only |
|
4 Game play time |
|
4 Colour system |
|
4 Fine sync. |
|
Version up |
|
|
|
H Input select
For setting the signal type of external equipment.
Input source | Selectable item |
|
|
INPUT4 | Auto, |
H PC audio select
When using the INPUT7 terminal or HDMI1 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input.
Selected item | Description |
|
|
HDMI1 | When connecting devices (including a |
| PC) with DVI/HDMI cable to the INPUT1 |
| terminal and inputting analogue audio |
| signals from the AUDIO (R/L) jack. |
|
|
INPUT7 (RGB) | When connecting a PC to the INPUT7 |
| terminal, and inputting analogue audio |
| signals from the AUDIO (R/L) jack. |
NOTE
•You must set this to “INPUT7(RGB)” when connecting devices (including a PC) with an
H Auto volume
Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. Auto volume solves this problem and equalises the volume levels. (On, Off)
H Digital audio output
This function allows you to select your favourite audio output system.
Selected item | Description |
Dolby Digital | Dolby Digital audio will be output when |
| there is a Dolby Digital audio signal. |
| The output will be in PCM when there |
| is no Dolby Digital audio signal. |
|
|
PCM | The optical output format is normally in |
| PCM. |
|
|
14
