Preparation
Setting the Display on the wall
Using an optional bracket to mount the Display•You can ask a qualified service personnel about using an optional
•Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
Vertical mounting | Angular mounting |
CAUTION
•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Setting the AVC System with the stand
How to install the AVC System vertically using the stand unit.• Use the supplied stand unit for installing the AVC System vertically in an upright position.
| Stick each spacer to the | Attach each cushion to | Fit the stand to the AVC | |||
| 1 stand as shown. |
| 2 the stand as shown. | 3 System. |
| |
Peel each spacer |
| Peel each cushion |
| Insert the stand into the AVC |
|
|
| System, making sure that the |
| ||
away from the |
| away from the |
|
| |
|
| thick and thin bulges of the |
| ||
paper and attach | Stand | paper and attach |
|
| |
| stand align with the big and |
| |||
to the four bulging | to the four areas at |
|
| ||
spacer | Stand cushion | small holes on the AVC |
| ||
areas on the stand. | the bottom. |
| |||
Bulge |
| System. |
| ||
|
|
|
| ||
|
| Attaching point | Thin bulge |
| |
|
|
|
| ||
|
|
|
|
| |
Bulge |
|
|
| Small | Thick |
| Attaching point |
| bulge | ||
|
|
| hole |
| |
|
|
|
| Big hole |
|
| Attach the stand using the | The AVC System installed |
|
| ||
| 4 stand screws as shown. | vertically with the stand. |
|
| ||
| Stand screw |
|
|
|
|
NOTE
•When mounting the AVC System vertically, always use the supplied stand. Be careful not to block vent holes when standing up directly on the floor or a flat surface as this can result in equipment failure.
11