Using external equipment

Watching broadcasts via a Digital TV tuner

Connecting a Digital TV tuner

You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment.

AVC System (rear view)

Component video cable

(commercially available)

When using component video cable, select “COMPONENT” for “Input Select” in the menu.

S-video cable

AV cable

(commercially available)

(commercially available)

 

DVI cable (commercially available) When using DVI cable, select “DVI”

for “Input Select” in the menu.

Digital TV tuner

 

TV CBL

VCR DVD

 

TV

/SAT

/LD

 

 

/DTV

 

 

POWER

ANT-A/B

INPUT

 

AV

FRONT

 

 

MODE

SURROUND

MTS

CC

 

TWIN

 

 

 

PICTURE

SELECT

 

VIEW

 

SUB

TWIN CH

MODE

FREEZE

INPUT

 

DISPLAY

SLEEP

EDIT/

LEARN

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

For INPUT3 signal

TV MENU

Option

Input Select

Auto

COMPONENT

AV-Y/C

DVI

Displaying broadcasts via a Digital TV tuner

To watch a Digital TV tuner image, select “INPUT3” from the “INPUT SOURCE” menu using INPUT on the remote control unit or on the Display. (See page 50.)

Then select “INPUT3” on “Input Select” in the “Option” menu to set the correct input signal type. (See page 50.)

The setting is stored and can be selected on the “INPUT SOURCE” menu.

NOTE

•Each time INPUT is pressed, the input source toggles.

•If the Digital TV tuner image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

•Refer to your Digital TV tuner operation manual for the signal type.

•DVI-DIGITAL INPUT cannot connect to a PC. Input resolution is compatible with 1080I, 720P, 480P and VGA (60Hz).

•Use the PC INPUT terminals on the front of the AVC System when connecting a PC. (See page 45.)

•When connecting to the DVI-DIGITAL INPUT terminal, be sure to use a commercially available DVI cable with ferrite core attached.

43