Useful adjustment settings
Input signal (for PC input mode)
•Some input signals may have to be registered manually to display properly.
•The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
640g400720g400
640g480848g480
1024g7681280g768
NOTE
•You can only select the “Input Signal” on the Setup menu when receiving one of the 6 input signals listed above.
MENU | TV/SAT/DVD | DTV/DVD TOP | |
RETURN |
| MENU | MENU |
SOURCE |
|
| DTV/SAT |
POWER |
|
| GUIDE |
|
| SET/ |
|
| ENTER | DTV/SAT | |
|
|
| |
|
|
| INFO |
| FAVORITE CH | VCR REC | |
|
| ||
A | B | C | D |
POWER | INPUT | VOL | VOL |
RECEIVER
1 Press MENU and the PC MENU screen displays.
2 Press c/dto select “Setup”.
3 Press a/bto select “Input Signal” and then press SET/ENTER.
PC MENU
SetupOption
Input Signal
Auto Sync.
Fine Sync.
Picture Flip[Standard]
Language[English]
4 Press a/bto select the desired input signal on the display.
Example
PC MENU
Setup
Input Signal
640 x 480
848 x 480
Noise clean
Produces a clearer video image.
MENU | TV/SAT/DVD | DTV/DVD TOP | |
RETURN |
| MENU | MENU |
SOURCE |
|
| DTV/SAT |
POWER |
|
| GUIDE |
|
| SET/ |
|
|
| ENTER | DTV/SAT |
|
|
| |
|
|
| INFO |
| FAVORITE CH | VCR REC | |
|
| ||
A | B | C | D |
POWER INPUT VOL VOL
RECEIVER
1 Press MENU and the TV MENU screen displays.
2 Press c/dto select “Option”.
3 Press a/bto select “Noise Clean”, and then press SET/ENTER.
•Some items may be grayed out. They are not selectable.
TV MENU
Option
Input Select | [Auto] |
|
|
|
|
Noise Clean | [Low] |
|
|
Audio Out | [Fixed] |
Cool Climate | [Off] |
|
|
4 Press a/bto select the desired level, and then press SET/ENTER.
TV MENU
Option
Noise Clean
Off
High
Low
NOTE
•“Noise Clean” is not selectable when channel display shows an input resolution of 480P, 720P or 1080I.
55