Preparation
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
1 Selecting the location of the System• Select a place with no direct sunlight and good ventilation.
• The Display and the AVC System are connected by the system cable. (See page 9 for details.)
System cable
AVC System
Display
Handling the Display
CAUTION
•The Display is very heavy. Move it with two or more people.
•Do not remove the stand from the Display unless using an optional bracket to mount it.
•When moving, put your hands on the Display, but never on the Display speakers.
•Keep enough space above and behind the Display.
Handling the AVC System
CAUTION
•Do not put a VCR or other device on the AVC System.
•Keep enough space above and on the sides of the AVC System.
•Do not block the ventilation openings on the top and left side, and the exhaust fan on the right side.
•Do not spread a thick cloth beneath the AVC System, or cover it with one, as this can cause overheating and result in malfunction.
CAUTION
Adjust the screen with both hands. Put one hand on the Display and tilt the screen while steadying the stand with your other hand.
You can adjust the screen vertically up to 10 degrees forward or 8 degrees back- ward, or rotate 10 degrees horizontally.
4inches (10 cm) or more
Keep enough space
2 inches (5 |
|
|
| |||
cm) or more |
|
| 2 inches (5 | |||
|
|
|
|
|
| cm) or more |
|
|
|
|
|
| |
|
|
|
|
|
| on both sides |
|
|
|
|
|
| |
There is an exhaust fan on the right side.
8