Use Sound Mode, Select a digital audio language

TV menu

•Balance: Sets the balance of the left and right speakers to best fit your listening position.

•Virtual Surround: Automatically switches the TV to the best surround sound mode available from a broadcast. Select On or Off.

•Digital Audio Out: Selects the type of digital audio out to PCM / Off / Dolby Digital.

•AVL (Auto volume leveling): Reduces sudden volume changes, for example, during commercials or when switching from one channel to another. Select On or Off.

•Type: (Only available for Digital channels.) Selects the type of audio broadcast.

*Normal: Sets regular audio only.

*Hard of Hearing: Sets the mix of hearing impaired audio with regular audio.

*Audio Description: Sets the mix of visually impaired audio with regular audio.

•Audio Description: (Only appears when you select MENU / EXIT > Sound > Type > Audio Description): Adjusts the volume of visually impaired audio.

4.Press ≤≥ to select / adjust the item to the desired level.

5.Follow the on-screen instructions to exit.

Use Sound Mode

Apart from manually adjusting sound settings, you can use Sound Mode to set your TV to a predefined sound setting.

1.Press MENU / EXIT on the remote control and select Sound.

2.Press OK or ≥ to enter Sound and select

Sound Mode.

3.Press ≤≥ to select one of the following settings:

•Personal

•Music

•Speech

4.Follow the on-screen instructions to exit.

The first time you set up your TV, you are prompted to select an appropriate menu language and to perform automatic installation of TV and digital radio channels (If available).

This chapter provides instructions on how to reinstall channels as well as other useful channel installation features.

NOTE

•Re-installing channels modifies the channel list.

Select a digital audio language

1.Press MENU / EXIT on the remote control and select TV.

2.Press OK or ≥ to enter TV menu.

3.Press <> to select 1st Audio or 2nd Audio.

4.Highlight your selection and press ≤≥ to select an audio language.

5.Follow the on-screen instructions to exit.

NOTE

•If your selected audio language is not broadcasted, the default audio language will be displayed.

Automatically install channels

This section describes how to search and store channels automatically. Instructions are for both digital and analogue channels.

EStep 1: Select your menu language

1.Press MENU / EXIT on your remote control and select Features ≥ Menu language.

2.Press ≤≥ to select your language.

3.Follow the on-screen instructions to exit.

EStep 2: Select your country

Select the country where you are located. The TV installs and arranges channels according to your country.

1.Press MENU / EXIT on the remote control and select TV ≥ Country.

2.Press ≤≥ or to select your country.