Preparation

Setting the TV on the wall

You can mount the TV on the wall, using the optional AN-37AG2 bracket for LC-32AX3X/LC-37AX3X.

For details, refer to the instructions supplied with the optional bracket.

CAUTION

Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

<Example>

Hanging on the wall

Wall mount bracket. (See the bracket instructions for details.)

Regarding the angle when mounting the TV on the wall

• The maximum angle to which you can tilt the wall-mounted TV is as follows. Do not tilt it more than the maximum angle.

LC-32AX3X

Up to 10°

 

 

LC-37AX3X

Up to 5°

 

 

Tilt the wall-mounted TV slowly when adjusting its angle.

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before attaching/detaching stand

Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.

Remove all terminal covers and connected cables.

Lay the TV down on cushioning (such as a blanket) over a table.

Make sure two or more people perform the operation.

CAUTION

Do not remove the stand from the TV unless using an optional bracket to mount it.

1

Unfasten the two screws used to secure the cover in place.

NOTE

2

Unfasten the four screws used to secure the stand in place.

3

Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

• To attach the stand, perform the above steps in reverse order.

10

Page 11
Image 11
Sharp LC-32AX3X, LC-37AX3X Setting the TV on the wall, Removing the stand, Example, Before attaching/detaching stand