Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Using CHr/son the remote control unit

Press CHr to increase the channel number.

Press CHs to decrease the channel number.

NOTE

CHr/s on the TV operates the same as r/s on the remote control unit.

Using 0 – 9 on the remote control unit

Select the channels directly by pressing buttons 0 to 9.

a

To select a 1-digit channel (e.g. channel 2):

• Press 0, followed by 2.

To select a 2-digit channel (e.g. channel 12):

• Press 1, followed by 2.

When viewing Teletext information

View a page directly which is 3-digit page number from 100 to 899 by pressing buttons 0 to 9.

Channel display

Channel display changes approximately after 3 seconds as shown below.

SAT.1

12

PAL

B/G

(Example)

SAT.1

12

MONO

Using Flashback (A) on the remote control unit

Press A to switch the currently tuned channel to the previously tuned channel.

Press A again to switch back to the currently tuned channel.

Press Ato toggle between the currently selected input source and the previously selected one.

Press A to return to the previous page in TELETEXT mode.

15

Page 16
Image 16
Sharp LC-37AX3X Simple button operations for changing channels, Using Flashback a on the remote control unit, Watching TV