HOW TO SET THE FACTORY PRESETS
Turn off the TV by pressing POWER on the TV.
After waiting for about 1 minute, press and hold down RESET and press POWER on the TV to turn on the TV. All setting items (except TV channel) return to the factory presetting.
NOTE
• Password will be cleared after running the factory presetting operation.
You can run the Auto Installation again by using the following steps. 1 Turn on the power of the TV.
2 Press MENU. (Make sure the menu screen displays.)
3 Press c/dto select “Setup”.
4 Press a/bto select “Auto Installation”, and then press ENTER. 5 Press c/dto select “Yes”, and then press ENTER.
The Password is
.
NOTE
•As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar place.
47
