Connecting external devices
SCART connection
Example of connectable devices
●VCR ● Decoder
●DVD player/recorder
SCART cable
SCART
Decoder
NOTE
•In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in “Source List” (Page 10).
Speaker/amplifier connector
Example of connectable devices
●Connecting an amplifier with digital audio input
Connect an amplifier with external speakers as shown below.
Optical Audio cable
DIGITAL
AUDIO
OUTPUT
Amplifier with optical
digital audio input
●After connecting
Digital audio output setting
After connecting an amplifier with optical digital audio input as shown, you should set an audio output format compatible with the programme you are watching or the device connected.
Go to “MENU” > “Sound” > “SPDIF Mode” > select “PCM” or “Dolby Digital”.
NOTE
•When you set this to “Dolby Digital”, and you receive the Dolby Digital or Dolby Digital Plus audio formats, Dolby Digital audio is output. Otherwise, PCM audio is output.
When you set this to “PCM”, PCM audio is output no matter what audio formats you receive.
15
