Sharp LC-70C7450U, LC-70C8470U, LC-60C7450U Experiencing HD Images, Using the Remote Control Unit

QUICK REFERENCE

4When turning on the TV for the fi rst time, press POWER on the television.

POWER

5Insert the batteries into the remote control unit. (See page 11.)

•Speakers cannot be detached from the TV.

•The TV angle cannot be adjusted. (For LC-70C8470U/LC- 70C7450U)

•The TV can be rotated up to 20 degrees to right and left. (For LC-60C8470U/LC-60C7450U)

Experiencing HD Images

An HDTV without an HD source is just an ordinary TV.

To enjoy HD images on the TV, you should get HD programming from the following:

•Over-the-air broadcasting via HD quality antenna

•HD cable/satellite subscription

•HD compatible external equipment

•For information on updating to HD programming, ask your cable/satellite service provider.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

17´ (5 m)	30º	Remote control sensor
	30º	30º
	30º

■Cautions regarding the remote control unit

•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

•The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the remote control sensor.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.