Connecting to External Equipment

Connecting a Surround System/Audio System

When connecting an AV amplifier for a surround system

HD Cable/Satellite set-top box

HDMI-certified cable *1

 

HDMI OUT

 

 

 

 

OPTICAL

 

 

 

DIGITAL AUDIO INPUT HDMI OUT HDMI IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optical fiber cable *2

 

 

 

 

• Letting the TV output the audio to an AV amplifi er:

*1

When you connect ARC-compatible equipment, use the HDMI IN 1 terminal.

*2

If the equipment to be connected is not compatible with the ARC, connect an optical fi ber cable.

NOTE

• If the image is not in sync with the audio, check the settings of the connected surround system.

When connecting an audio amplifier

It is possible to output audio through the DIGITAL AUDIO OUT terminal. (See page 26 for details.)

Optical fiber cable

OPTICAL

DIGITAL AUDIO INPUT

Ø3.5 mm stereo minijack to RCA audio cable

ANALOG AUDIO IN

NOTE

• See page 27 for details on the Output Select function.

Connecting a PC

Refer to page 45 for a list of PC signals compatible with the TV.

When using an HDMI cable (HDMI IN 1, 2, 3 or 4):

HDMI-certified cable

HDMI OUT

NOTE

Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 44.)

The HDMI IN terminals only support digital signal.

When using a DVI-HDMI conversion cable (HDMI IN 2):

DVI-HDMI conversion cable

DVI OUT

Ø 3.5 mm stereo minijack cable

AUDIO

NOTE

When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 44.)

When using an analog RGB cable (PC IN):

Analog RGB cable

(D-sub 15-pin cable or VGA cable)

Ø 3.5 mm stereo minijack cable

AUDIO RGB

NOTE

When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.

When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 44.)

15

Page 17
Image 17
Sharp LC70LE655U Connecting to External Equipment, Connecting a Surround System/Audio System, Connecting a PC