Sharp LC 42D43U, LC 52D43U Using external equipment, Press 4/ to select Yes, and then press

Using external equipment

To watch an HDMI/PC-IN equipment image, select "INPUT4" or "INPUTS" from "INPUT

SOURCE" menu using iNPUT on the remote control unit or on the TV.

_I_INPUT4

Press MENU to display the MENU screen, and then press _11/_-to select "Option".

Press A/Y to select "HDMI Setup", and then

press ENTER.

Press A/Y to select the desired item, and then press ENTER.

Press _/_ to select the desired setting, and then press ENTER.

This setting allows you to skip the HDMI/PC-IN Input on the Input Selection operation.

Press MENU to display the MENU screen, and then press _/_ to select "Setup".

Press A/Y to select "Input Skip", and then press ENTER.

Press A/T to select the Input (INPUT 4, INPUT 5 or INPUT 6) you wish to skip, and then press ENTER.

Input 4 (HDMI)

Press 4/_ to select "Yes", and then press

ENTER.

Press MENU to exit.

Auto View	Enable	Set whether or not to use
	Disable	View Mode based on signal
		recognition, including an HDMI
		signal.
Audio	Digital	Select "Digital" for an audio
Select	Analog	signal via the HDMI terminal.
		Select "Analog" for an audio
		signal via the R-AUDIO -L
		terminal.
Press MENU		to exit.

Refer to your external equipment operation manual for the signal type.

"Audio Select" is only available for INPUT 5.

When connecting an HDMFDVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Q- 31