Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
® Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
•Before performing work make sure to turn off the TV.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Hex key | Hex key | ||
|
|
TI TT
Unfasten the four screws used to secure the stand in place.
Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)
r® | i | \ " |
|
LC-46D43U/LC-52B43U LC-42D43U
,, To attach the stand, perform the above steps in reverse order.
The model
®This TV should be mounted on the waft only with the
®Installing the "IV requires special skill that should only be performed by qualified service personnel. Customers should net attempt to de the work themselves, SHARP bears no responsibility for improper mounting or mounting that results in accident or injury,
Using an optional bracket to mount the TV
*You can ask a qualified service professional about using an optional
e Carefully read the instructions that come with the bracket before beginning work.
r
Hanging on the wall
Vertical mounting Angular mounting
About setting the TV angle and height adjustment
f | J |
0o/5 °
For
(_ Angle of TV 0/5/10/15/20 °
(_ Height | 1 | 63/6_( | 5)/0/ |
Adjustment | + 1 | 63/6_(+ 5) | |
| "(:an be moved | ||
| 1 _3/_4(5) up or | ||
| down |
| |
| Unit: inch | (cm) | |
f | J | f | J |
AN-37AG2 AN-52AGf
,, Detach the (:able (:lamps on the rear o1 the TV when using the optional mount bracket.
Q- 51
