![](/images/new-backgrounds/1157883/157883105x1.webp)
Appendix
Problem |
|
| Possible Solution |
| |
,' No power | ,' Check if you pressed TV POWER oil | the remote control unit. (See page 16.) If the | |||
|
| indk_'atoron the TV does not light up, | press POWER | on the TV. | |
| ,, | Is the AC cord disconnected? | (See page 8.) |
| |
|
| Has the power been turned on? (See page 16.) |
| ||
Unit cannot be operated. | • | External influences such as lightning, | statk_"electricity, | may cause improper operation. | |
|
| In this case, operate the unit after first turning on the power of the TV or unplugging | |||
|
| the AC cord and replugging | it in after | 1 or 2 minutes. |
|
,,Remote control unit does not operate.
,,Is the FUNCTION set correctly? Set it to the TV setting position.
• Are batteries inserted with polarity (+, ) aligned? (See page 9.)
,,Are batteries worn out? (Replace with new batteries.) Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control sensor?
,, | Picture | is cut | off/with sidebar | ,, | Is the image | position correct? | (See page 33.) |
|
|
| |||||
| screen. |
|
|
| • | Are screen mode adjustments | such | as picture | size made | correctly? (See pages 35 | |||||
|
|
|
|
|
| and 36.) |
|
|
|
|
|
|
|
|
|
| Strange | color, | light color, | or color | • | Adjust the pk_'turetone. (See pages | 26 to 27.) |
|
|
| |||||
| misalignment |
|
| ,, | Is the room too bright? The picture | may look dark in a room that | is too bright. | ||||||||
|
|
|
|
| ,, | Check the input signal setting. (See page 38.) |
|
|
| ||||||
,, | Power is suddenly turned | off. | ,, | Is the sleep timer | set? | (See page 34.) |
|
|
|
| |||||
|
|
|
|
|
| Check the power control settings. (See page 29.) |
|
| |||||||
|
|
|
|
| ,, | The unit's internal temperature | has | increased. Remove any objects blocking vent or | |||||||
|
|
|
|
|
| clean. |
|
|
|
|
|
|
|
|
|
| No picture |
|
| • | Is connection | to other | components | correct? | (See pages | 14 and | 15.) | ||||
|
|
|
|
| ,, | Is correct input signal | source | selected after | connection? | (See page 30.) | |||||
|
|
|
|
| ,, | Is the correct | input selected? | (See page 30.) |
|
|
| ||||
|
|
|
|
|
| Is picture adjustment correct? (See pages 26 to 27.) |
|
| |||||||
|
|
|
|
| ,, | Is "On" selected | in "Audio Only"? (See page 37.) |
|
| ||||||
|
|
|
|
|
| Is a |
|
| |||||||
,, | No sound |
|
| ,, | Is the volume | too | low? (See page 19.) |
|
|
|
| ||||
|
|
|
|
|
| Is "Variable" selected in "Output Select"? (See page 37.) |
|
| |||||||
|
|
|
|
| ,, | Have you pressed MUTE on the remote control | unit? (See page | 19.) |
,,The TV sometimes makes a cracking sound,
,,This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV's performance.
The error message about reception of broadcast
The example of an error message Error code displayed on a screen
Failed to receive broadcast. | E202 |
Possible Solution
,,Check the antenna cable. Check that the antenna is correctly setup.
,, No broadcast now. | E203 | ,, Check the broadcast time in the program guide. |
Cautions regarding use in high and low temperature environments
,' When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: 4°Fto +140°F( 20°Cto +60°C)
(D- 52