On-Screen Display Menu

Power Control Menu

Power control setting allows you to save energy.

Example

Power Control

No Signal Off

[Disable]

No Operation Off

[Disable]

1Press MENU to display the MENU screen, and then press c/d to select "Power Control".

2Press a/b to select a "No Signal Off" or "No Operation Off", and then press ENTER.

3Press c/d to select "Enable", and then press

ENTER.

4Press MENU to exit.

No Signal Off

When set to"Enable", the power will automatically shut down if there is no signal for 15 minutes.

•Five minutes before the power shuts down, the remaining time displays every minute.

•"Disable" is the factory preset value.

•When a TV program fi nishes, this function may not operate.

No Operation Off

When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.

•Five minutes before the power shuts down, the remaining time displays every minute.

•"Disable" is the factory preset value.

Setup Menu

Example

Setup

EZ Setup

CH Setup

Antenna Setup-DIGITAL

Input Skip

Parental CTRL

Position

Language[English]

Reset

1Press MENU to display the MENU screen, and then press c/d to select "Setup".

2Press a/b to select a specifi c adjustment item, and then press ENTER.

•When you select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", you can enter the 4-digit secret number here. See page 26 for setting a secret number.

3Press a/b (or c/d) to select the desired setting, and then press ENTER.

4Press MENU to exit.

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language: Select from among 3 languages (English, French and Spanish).

TV Location: Select "Home" or "Store" for the location where you plan to install the TV.

•If you select "Home", AV MODE is set to "STANDARD".

•If you select "Store", AV MODE is set to "DYNAMIC (Fixed)". In case no remote control signal is received within 30 minutes, AV MODE will change to "DYNAMIC (Fixed)" automatically.

Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all channels viewable in the set area.

•See "Initial Setup" on page 15 for setting each item.

•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

•If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

24