![](/images/backgrounds/176153/176153-598x1.png)
QUICK REFERENCE
■
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1 | Confi rm that there are 4 screws and a screwdriver | |||
| supplied with the speaker unit. |
| ||
2 | Insert the projections on the speaker unit into the | |||
| corresponding slots on the TV, then fasten the screws. | |||
|
|
|
| Screwdriver |
|
|
|
| Screws |
| 3 | 1 | 2 | 4 |
|
|
|
3 Connect the ends of the cables to the speaker terminals as shown below.
Connect the leads to the speaker terminals of the same color.
Black | Red |
Soft cushion |
|
Red
Black
Insert and tighten the 4 screws with the screwdriver (supplied with the product) in the order of 1, 2, 3 and 4.
•To detach the speaker unit, perform the steps in reverse order.
Attaching the Stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 | Confi rm that there are 12 screws (all the same size) |
| supplied with the TV. |
2 1 Set the post for the stand unit onto the box. 2 Attach the base to the post.
3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base.
Hex key
3
Screws
2
1
3 1 Insert the stand into the openings on the bottom of the TV.
2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV.
2 Hex key
Screws
Soft cushion
1
• To detach the stand, perform the steps in reverse order.
6