Sharp LC 46SE94U, LC 52SE94U, LC 65SE94U Setting the TV on the Wall, Appendix

Appendix

Setting the TV on the Wall

CAUTION

•This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U/ LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SE94U). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the TV requires special skill that should only be performed by qualiﬁed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualiﬁ ed service professional about using an optional AN-52AG4 or AN-65AG1 bracket to mount the TV on the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-52AG4 or AN-65AG1 wall mount bracket. (See the bracket instructions for details.)

Vertical mounting

Angular mounting

About setting the TV angle

AN-52AG4

			LC-46SE94U
	0 /5 /10 /15 /20		• The center of the display:
	0 /5 /10 /15 /20		6 3/4 inch (174.25 mm)
			6 3/4 inch (174.25 mm)
			under the "A" position.

LC-52SE94U

• The center of the display: 5 1/4 inch (136.1 mm) under the "A" position.

• Refer to the operation manual of AN-52AG4 for details.

LC-46SE94U

LC-52SE94U

AN-65AG1

• The "A" position is at the

0 /5 /10center of the display. Refer to the operation manual of AN-65AG1 for details.

LC-65SE94U

•Detach the cable clamp on the rear of the TV when using the optional mount bracket.

•To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.