Supplied Accessories
Make sure the following accessories are provided with the product.
|
|
|
| ||
|
|
|
| ||
|
|
|
|
| |
Remote control | AC cord (g1) | Cable clamp (g1) | Stand hole cover | Speaker unit | Stand unit |
unit (g1) | Page 7 | Cable tie (g1) | (g2) | (g1) | (g1) |
Page 8 |
| Page 7 | Page 45 | Pages 5 and 6 | Page 6 |
H Operation manual (g1) H “AAA” size battery (g2) Page 8
•Always use the AC cord supplied with the TV.
•AC cord enclosed in this product is for
SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP 6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.
QUICK REFERENCE
Attaching the Speaker Unit
•Before attaching (or detaching) the speaker unit, unplug the AC cord from the AC INPUT terminal. ■
1 | Confi rm that there are 4 screws and a screwdriver | 3 Connect the ends of the cables to the speaker |
| supplied with the speaker unit. | terminals as shown below. |
|
| Connect the leads to the speaker terminals of the |
|
| same color. |
2 | Insert the projections on the speaker unit into the |
|
| corresponding slots on the TV, then fasten the screws. |
|
Red
3 | 1 | 2 | 4 |
Black
Screws 
Screwdriver 
Insert and tighten the 4 screws with the screwdriver (supplied with the product) in the order of 1, 2, 3 and 4.
•To detach the speaker unit, perform the steps in reverse order.
5