Sharp LL-T17A3 Connecting the monitor and turning the monitor on and off, Turning the power on

Connecting the monitor and turning the monitor on and off

Turning the power on

1.Press the monitor's POWER button.

2.Turn on the computer.

The power LED will be lit green, and the screen will display an image.

Turn on the computer

ON

Press power button

Notes:

-If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment.

-Depending on the computer or OS, it may be necessary to use the computer to install monitor set-up information. If so, follow the steps below to install the monitor set-up information.

Installing set-up information and the ICC profile (for Windows)

Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer’s own operation manual while reading this.)

About the ICC profile

An ICC (International Color Consortium) profile is a file that describes the color characteristics of the LCD monitor. By using an application that works together with an ICC profile, a high color resolution can be realized.

-Windows98/2000/Me/XP all use the ICC profile.

-When installing Windows98/2000/Me/XP set- up information (described below), the ICC profile is also installed. If you would like to install the ICC program only, please refer to Installing the ICC profile on page 14.

-When using an ICC profile, set [COLOR MODE] and [WHITE BALANCE] to [STD] .

Turning the power off

1.Turn the computer off.

2.Press the monitor's POWER button. The Power LED will disappear.

Turn the computer off

OFF

Press power button

If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet.

Installing set-up information

For Windows95

Installing monitor set-up information into Win- dows95.

This explanation assumes that the floppy disk drive is "A drive".

1.Place the Utility Disk (provided) into the computer's A drive.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced Properties], and [Monitor], then [Change].

5.Click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:] then click [OK].

6.Confirm that the monitor details are selected, and click [OK].

7.Check that the monitor details are displayed, then click [Apply].

8.Click [OK], and close the window.

9.Remove the Utility Disk from the A drive.

12