Installation
The monitor can be installed in three different ways. | nMounting the monitor on the stand |
| 1. Place the stand on a level surface. |
Standing position |
|
Place the monitor on the supplied stand. |
|
Caution
•The stand is for use in landscape orientation. It cannot be used for portrait orientation.
nAssembling the stand | 2. Set the monitor on the stand. | |||||
1. Insert the back into the front. | Set the monitor so that the logo in the center is aligned with | |||||
the circle mark on the stand. | ||||||
Align the mark () on the front with the edge of the back | ||||||
| ||||||
and insert the back from above. |
| |||||
| Back |
| ||||
Back |
|
|
| |||
|
| |||||
|
|
|
|
|
| |
|
|
|
|
|
| |
Front
Logo
Front
2.Slide the back across.
Slide the back until it clicks into place.
Circle mark
Back
3.Attach the bottom cover.
Align the arrow on the bottom cover so that it points toward
the front, and press the projections on the bottom cover into the pocket on the front and back.
Front | Back |
Front pocket | Back pocket |
Projection |
|
| Bottom cover |
Arrow |
|
TIPS
•The stand and the monitor can be secured with fixing screws.
Fixing screws (supplied) |
