Sharp MD-MX30 MD Sound Control, Volume, Pre-programmedequalizer, Extra bass X-BASS, Surround

SOUND CONTROL

■Volume

(Main unit) (Remote control)

0 15 MAX

(Main unit operation)

When the VOLUME control is turned clockwise, the vol- ume will increase. When it is turned counterclockwise, the volume will decrease.

(Remote control operation)

Press the VOLUME button to increase the volume and the VOLUME button to decrease the volume.

Servo Powered Volume:

(Main unit) (Remote control)

VOLUME

SELECT

The VOLUME control automatically comes out when the power is turned on, and goes back when the unit is set to the stand-by mode.

●When the power is turned on, you can put the VOLUME control in and out by pressing the VOLUME SELECT but- ton.

Note:

●Do not push in the VOLUME control forcibly with your fin- ger as this may damage the unit.

■Pre-programmed equalizer

(Main unit) (Remote control)

EQUALIZER

FLAT HEAVY

SOFT VOCAL

When the EQUALIZER button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER button repeatedly.

FLAT: The sound is not modified.

HEAVY: Bass and treble are emphasized.

VOCAL: Vocals (midrange tones) are emphasized.

SOFT: Treble is reduced.

■Extra bass (X-BASS)

(Main unit)	(Remote control)
X-BASS	X-BASS

X-BASS

Press the X-BASS button to emphasize the bass region of the frequency spectrum.

●"X-BASS ON" will appear.

Press the X-BASS button again to cancel the extra bass mode.

●"X-BASS OFF" will appear.

Note:

●Turn the X-BASS to the off position when playing the unit at high volume levels to avoid speaker distortion.

■Surround

(Main unit) (Remote control)

SURROUNDSURROUND

SURROUND

Press the SURROUND button to widen the soundstage and surround you with sound.

●"SURROUND" will appear.

Press the SURROUND button again to cancel the sur- round mode.

●"PASS" will appear.

12