Sharp MD-MX30 MD 1,10 TIMER 3 2 MD H ENTER, Timer Operation, Timer playback/Timer recording

Models: MD-MX30 MD

1 44
Download 44 pages 19.88 Kb
Page 33
Image 33
TIMER OPERATION

TIMER OPERATION

IBefore setting the timer, make sure that the clock setting is correct (page 11).

Timer playback/Timer recording

MEMORY/

1,10 TIMER 3 2 MD H ENTER

■Timer playback/Timer recording Jog dial 2 CD H

9

2 TUNER (BAND) 2 AUX

Before timer operation, the following preparations are required.

Load a CD and a recordable MiniDisc for timer recording or

Preset the radio station that you want to record from or listen to during timer playback.

1 Press the ON/STAND-BY button to turn the power on. 2 (To select timer playback source)

Press the CD , MD , TUNER (BAND) or AUX button.

(To select timer recording source)

Press the CD , TUNER (BAND) or AUX button.

3 (To select timer playback)

Press the TIMER/DELETE button to select the timer playback mode.

1,10 TIMER 3 2 MD H ENTERManual backgroundManual backgroundPLAY

(To select timer recording)

Press the TIMER/DELETE button again to select the timer recording mode.

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundREC

4 While "f PLAY" or "f REC" is flashing, press the MEMORY/ENTER button.

5 Turn the jog dial to set the hour to start, and then press the MEMORY/ENTER button.

6 Turn the jog dial to set the minute to start, and then press the MEMORY/ENTER button.

IIf the ending time is not set manually, it will automatically be set for one hour after the starting time.

7 Turn the jog dial to set the hour to stop, then press the MEMORY/ENTER button.

8 Turn the jog dial to set the minute to stop, then press the MEMORY/ENTER button.

PLAY or

Manual backgroundREC

9 Adjust the VOLUME control for the desired volume.

Be careful not to turn the volume up too high.

10 Press the ON/STAND-BY button to enter the stand- by mode.

The TIMER indicator will light up.

11 When the timer start time is reached, timer playback or timer recording will start.

12 When the timer end time is reached, timer recording will stop.

Notes:

IThe timer cannot control the component connected to the auxiliary input jacks.

IWhen the CD or MiniDisc is played to the end, playback will stop before the stop time.

If you wish to play to the stop time, set repeat play for the CD or MiniDisc.

Timer playback and timer recording cannot be set at the same time using the timer.

32

Page 33
Image 33
Sharp MD-MX30 MD operation manual 1,10 TIMER 3 2 MD H ENTER, Timer Operation, Timer playback/Timer recording